Vang Purchase Plate
 From Boomkicker estimates, roughly 80 or 90% of Boomkicker customers do not increase the purchase of their vang. If the vang was easy enough to pull before installing the Boomkicker, it's usually fine after.
However for customers looking to get more power out of the vang, purchase plates are a relatively easy and affordable way to double the power without buying a whole new block and tackle system. No drilling required. Two sizes available with thick aluminum plates to spread the load evenly over the shackle pins. Harken and Wichard shackles standard.
To double an existing multi-purchase vang, you'll need the purchase plate, a single block for the boom and a cascade line or wire. The puchase plates come standard with a straight D shackle for the mast attachment, but twist shackles are available. Specify if needed when ordering.
The cascade line should be a high tech, low stretch line or wire. The single for the boom needs to be designed for the load and either the line or wire.
Order online Boomkicker Vang Plates |
1. Fast, easy setup and adjustment. The new fitting
consists of 3 parts, the T track, the sliding car attached to the
Boomkicker and the adjustable stop. The track attaches
to the bottom of the boom . The car is free to slide with the stop
set by a spring loaded pull knob. 
