Harken Ball Bearing Adjustable Genoa Lead Cars

Recirculating Torlon® ball bearings allow genoa lead cars to adjust easily under full sheet loads.
Sheaves feature ball/roller bearings with side load balls for easy trimming and fore/aft adjustment under load. Wide sheaves accommodate two sheets during sail changes. Sheaves carriers pivot to accommodate changing lead angles.

1869 and 3072 Mini-Maxi cars come with control blocks for a 2:1 purchase or puller tangs for a 1:1 system.

Buy Online | Tech Info

Harken Pinstop Jib Leads

Dinghy: These easy-to adjust cars combine a spring-loaded pinstop with precise track spacing. Use on dinghies and small sport boats with jibs up to 140 ft2 (13 m2). Car and track are built of tough 6061-T6 aluminum that is Hardkote- anodized black with Teflon® impregnation for durability. The 450 pinstop jib lead has a removable bail to attach a spring and block. The 452 bullseye lead has a controlled pivot angle so the cleat is always within easy reach. Use 451 bullseye cars when line deflection is small.

Small Boat: Spring loaded pinstop cars offer two lead solutions for small keel boats from 22 ft to 27 ft (6 to 8m). The 2750 is for racers like the J/80 or Melges 24 Attach lightweight 57 or 75 mm Carbo blocks. Combine with 370 stand-up boot or use the 57 mm Ti-Lite. The 393 genoa lead uses an axle bearing sheave. The sheave carrier pivots to accept unfair leads. Removable stop limits inboard pivoting so lead can mount near cabin side.

Buy Online | Tech Info