Home

Shop by Brand

Selection Guides

Sailing Gear

Sailboat Hardware

Rigging

One Design Parts

Harken Store

| Call: 1-888-756-8883 | Contact Us | View Cart | > Check Out <

Search for:

Store Categories

Anchoring & Docking
Books, Videos and CD
Canvas Shop
Clothing
Communications
Electronics
Furling Units & Acc.
Headsail Handling
Lines and Ropes
Navigation
Rigging
Safety Equipment
Sailboat Equipment
Sailboat Hardware
Sail Loft
Sail Trimming
Sailing Gear
Steering
Ventilation

Tech Info

Deck Specs
Rig Dimensions
Selection Guides
Technical Information
Trimming Systems

Special Areas

Coupons and Offers
Close Outs
Gift Certificates
Newsletter

Customer Care

About Us
Contact Us
Live Help / Chat
International Shipping
Price Matching Policy
Sales Tax Info
Shipping Policy
Return & Exchanges

Harken Loading Formulas
Go to: Harken Tech Info

Block Loading

Genoa System Loading

Mainsheet System Loading

Rig Dimensions

Block Loading vs. Angle of Deflection: Load on a block is a combination of the load on the line passing through the block, plus a block-loading factor, which is determined by the angle by which the block turns a sheet. For example, a footblock that turns a sheet 180-degrees will see a load equal to twice the load on the sheet. A deck organizer, which turns a halyard only 30 degrees, will see just 52 percent of the load on the halyard.

Boat Type: Most load formulas assume a medium displacement monohull, but you can easily correct for other boat types. Multihulls have great form stability and speed and will often carry sails very high in the apparent wind speed, so calculations must be done with this wind speed in mind. ULDB's are typically tender and often change sails or reef quite early, so loading may be done at relatively low wind speeds. For example, a modern trimaran may carry its blade jib in 25 knots of wind at speeds over 15 knots for an apparent wind of nearly 40 knots, whereas a ULDB will probably remove its #1 genoa at about 15 knots of apparent wind.

Angle of
deflection

Load factor

Angle of
deflection

Load factor

Angle of
deflection

Load factor

30º

52 %

90º

141 %

150º

193 %

45º

76 %

105º

159 %

160º

197 %

60º

100 %

120º

173 %

180º

200 %

75º

122 %

135º

185 %

Top

Genoa System Loading

Because wind speed is squared, it is the most important variable and can greatly influence loading. Wind speed ( the apparent wind) should be calculated for the specific sail being analyzed. For example, the # 1 genoa on a 25 ft ( 7 m) boat might only be carried in 15 knots of wind while the # 3 blade on a Maxi-boat could well be carried in 40 knots.

To calculate loading on a genoa lead car, multiply sheet load by the load factor of the sheet. Most #1 genoas will deflect about 45-degrees, while a #3 genoa may deflect 75-degrees or more.

Lead car adjuster tackle load is dependent on the angle of deflection of the sheet in the lead car, but is generally assumed to be .3 of lead car load when deflection is 45-degrees and .5 of lead car load when deflection is 60-degrees.
harken loading formulas

Genoa Sheet Load
Imperial		Metric

SL = SA x V² x 0.00431		SL = SA x V2 x 0.02104
SL	Sheet load in pounds	SL	Sheet load in kilograms
SA	Sail area in sq. ft.	SA	Sail area in square meters
V	Wind speed in knots	V	Wind speed in knots

Top

Mainsheet System Loading

The formula for mainsheet loading is not as widely accepted as that for genoa sheet loads and should only be used as a rough guide for offshore boats from 30 ft to 60 ft (9 to 18 m). Traveler car adjuster load is generally considered to be .2 times car load.
harken loading formulas

Mainsheet Load

Imperial

Metric

ML = E² x P² x 0.00431 x V²
(vP² + E²) x (E - X)

ML = E² x P² x 0.02104 x V²
(vP² + E²) x (E - X)

Mainsheet load in pounds

Mainsheet load in kilograms

Foot length of main in feet

Foot length of mains in meters

Luff length of main in feet

Luff length of main in meters

Wind speed in Knots

Wind speed in knots

Distance from aft end of boom to mainsheet attachment point in feet

Distance from aft end of boom to mainsheet attachment point in meters

Top

Rig Dimensions

The following abbreviations are often used to describe various measurements on a sailboat. Precise technical definitions exist for each abbreviation, but the following is a list of simple descriptions.

Descriptions

LOA

Length Overall- overall tip-to-tip length of the boat

LWL

Length Waterline- length of waterline of the boat

DWL

Design Waterline- theoretical waterline length of boat as opposed to LWL, which is actual waterline length

BMX

Beam Maximum- width of the boat at the widest point

BWL

Beam Waterline- widest beam of boat at the waterline

Height of the foretriangle measured from the top of the highest sheave to the sheerline

Height of staysail halyard above deck

Base of the foretriangle measured from the front of the mast to the intersection of the forestay and deck

Base of staysail triangle

Luff length of the mainsail

Foot length of the mainsail

Shortest distance from headstay to the clew of the jib

Top

Harken Loading Formulas

We at Mauri Pro Sailing are fully committed to be your Harken sailing equipment specialist not only providing the sailing community with a comprehensive , easy to use web site but with all the appropriate technical information that you might need to select Harken sailboat hardware and sailing gear.

Pictures and text courtesy of Harken Sailboat Equipment

Harken Store

harken sailboat equipment at mauri pro sailing store

Store Newsletter

Past issues | Sign Up

General Info

No Sales Tax at mauriprosailing.com
Only orders shipped to Texas are charged sales tax.

Price Matching
Buy with confidence. We do our best every day to ensure that our prices are the best you can find. If within 30 days you find a better price, we’ll refund the difference as a store credit. Read more.

International Shipping
We ship to most of the countries in Europe, Caribbean South America, Asia and Oceania.

Returns & Exchanges
Customer satisfaction is our top priority and we want you to be completely satisfied with your purchase. We ensure you a quick and hassle-free return or exchange process. More.