Johnson Diamond Plate Backstay An integral part of the Johnson Marine Split Backstay Adjuster System. Parts numbr 38-211 and 38-212 are double plates and may also be used whit eyes terminals. Large Diamond Plates are design to compliments the looks of the new Johnson larger Backstay car, comes complete whit cotter and clevis pins and are made of T-316 stainless steel.

Order Diamond Plates Backstay

Johnson Adapter Link Plates These very useful links come in pairs and will allow you to convert and eye to a jaw or a jaw to a eye. Dash numbers have one hole bushed to accommodate dissimilar pin sizes.

Order Adapter Link Plates

Johnson Split Backstay Adjuster This adjusting car replaces separate blocks and connecting member. Tandem sheaves eliminate sever flexing of the backstay. A neat, thoroughly functional terminal. The 38 series with Delrin sheaves is intended for boats under 30 feet, while the husky 39 series with aluminum sheaves is intended for boats up to 40 feet.

Order Split Backstay Adjusters

Johnson Open Body Turnbuckles Jaw to Jaw The forged silicon bronze body, coupled whit Jhonson integral toggle jaw, provides positive lockingand ease of adjustment. Forged Silicon bronze bodies whit stainless ends offera great non- galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle.

Order Open Body Jaw to Jaw Turnbuckles

Johnson Rigging Terminals At Johnson they understand what is needed to rig dinghies up through large cruisers. For that they offer a full line of studs, backstay/inner forestay turnbuckles, toggles, plates pins and rings. Everything you need to rig and tune your boat safely.

Order Rigging Terminals

Johnson Rigging Toggles These stainless steel rigging toggles are essential to prevent misalignment of rigid jaw turnbuckles. They are also used as a simple way to save rigging that was made too short. Ultimate strength exceeds the corresponding clevis pins. All sizes include pins.

Order Rigging Toggle

Johnson Double Jaw Toggles Are only used to facilitate toggling action when used whit marine eyes and mechanical fittings. These toggles are available in 7 sizes from 1/4" to 3/4" pins sizes.

Order Double Jaw Toggle

Johnson Stay Extenders These stainless steel plates are designed for extending short stays, or to replace a turnbuckle. Several of these are a must for the ship's kit. All sizes include pins.

Order Stay Extenders

Johnson Stay Adjuster The Stay Adjuster- Quick Release are developed for dry sailed one-design dinghies, when the quick release pin is pulled, easy adjustment and unrigging can be obtained. Shroud Adjuster Single Row Hole, are good for applications where precise tuning is not required; Double Row Hole, offer more precise tuning for stays and shrouds.

Order Stay Adjusters

Johnson Quick Release Levers The Johnson Hyfield are developed after extensive testing on both high performance multi-hulls and monohulls. The fitting is rugged, having an ultimate strength of 2500 lbs. A positive stop is provide to prevent jamming fingers between fitting and wire when thrown open onder load and the large surface area of the push pad makes it easier to close lever under load. This is an essential piece of hardware on Catamaran shrouds to allow the crew to right the boat after a capsize, without it, another boat or extraordinary effort is required.

Order Quick Release Levers