 Beam Track. Some beam tracks can only use metric fasteners; see table for details. Beam track is available from size 0 to 3 and is used when spanning cockpits and across companion way hatches.
Three fixing bolts should always be used on either side of the span and washers fitted under the head of the bolt
and between track and deck. Technical Information.
Heavy Duty Beam Track. Used for greater span width. Technical Information.
 Sliding Bolt Track. Available in sizes 1 & 2 and has two significant features – a smooth, clean profile with no
visible fixings and the ability to retrofit new track to the deck using original bolt holes – no need to worry about
old track pattern holes matching up with a new track. The track is designed to permit a washer to fit on each
bolt between the track and deck to ensure a secure seal. Technical Information.
 Drilled Plunger Track. Drilled track is commonly used and particularly useful where through deck fixing is not possible. An example
would be double-skinned boats, where fixing bolts are trapped into a plate in the deck. Available from size
0 to 3. Technical Information.
Ocean Size 0 Tracks: For cruising sailboats up to 28ft. (8.5 m).
Ocean Size 1 Tracks: For cruising sailboats up to 36ft. (11 m).
Ocean Size 2 Tracks: For cruising sailboats up to 49ft. (15 m).
Ocean Size 3 Tracks: For cruising sailboats up to 72ft. (22 m).
Read About Lewmar Tracks and T-Tracks Technical Information
|
