Norseman Rigging Swageless Terminals

Norseman Terminals: Swageless Eyes, Forks, Studs, Steamball are an ideal replacement parts. They provide a fast, secure, corrosion-resistant end fitting on all types of wire rigging. They can be installed quickly and easily at sea, making them ideal for emergency repairs. Norseman terminals also can be re-used, but please note: A new cone must be installed.

Norseman Swageless terminals are manufactured with 316 Stainless Steel and generally have a life span greater than the wire they are terminating. This lifespan can last through a wire re-rig, but Navtec recommends the replacement of the internal cone with each inspection. It is also important to carefully inspect the socket internally for signs of wear, and any sign of cracks would require replacement of the whole assembly.

Norseman Terminals provide a completely secure end fitting on good conventionally constructed strand, Dyform strand and rope for any one using ordinary tools and following the fitting instructions. They have an international reputation for quality, efficiency, versatility and safety.

They feature:
1. Accuracy is achieved first time when rigging, giving economy of labour and materials.
2. Inspection can be undertaken at any time simply by undoing the assembly.
3. In emergency, Norseman Terminals can be fitted at sea in minutes as they do not require power presses, correct temperature conditions or curing time.
4. Terminals can be reused but MUST have a new cone.

Read about Norseman Swageless Fittings Dimensions:

Eyes | Forks | Studs | Long Studs | Shorud Terminals | Stemballs | T Terminals

Norseman Aerial Rigging Insulator

For converting high tensile yacht rigging into antennae for transmission and reception, Norseman Insulators provide a completely secure method of converting yacht backstays into aerials. They have been approved by Lloyd’s for many years and the Norseman Insulator is recommended by leading marine electronic distributors. Insulators are manufactured from marine stainless steel to specification 316 Stainless Steel for the end fittings, an approved insulant, and anodised high strength aluminum. Fully tested in an approved environmental laboratory, electrical performance was found satisfactory after exposure to salt spray and to 95% relative humidity at 35°C for four periods of seven days.

Order online | Norseman Rigging Insulators Tech Info

Top