DESCRIPTION

Take the hard work out of your sailing time with Andersen Electric Winches. They allow you to raise the sails or trim the sheets with the push of a button to expand the range of weather conditions in which you can safely set sail. If you enjoy short-handed sailing or have a large, hard-to-control mainsail or genoa, electric winches are a great choice. Easily user installed and maintained, Andersen Electric Winches are supplied complete with an easy-to-follow installation manual, electronics box, switches and cable terminals.

Andersen 12V Below Deck integrated overload protection - The controller is pre-set to stop the winch if the maximum pull load is exceeded. Operation can resume within a few seconds when the load returns below the limit.

Easily user installed and maintained, Andersen 12V E1Conversion Kits are supplied complete with an easy-to-follow installation manual, electronics box, switches and cable terminals. They can be installed in the same position as your current winches by removing the old ones, drilling matching holes for the winch and motor drive, and making the electrical connections. Safe for extended offshore use, the motor is protected from overload by an amperage sensor to cut off power at a pre-set overload. All electric motors are also fitted with thermal cut-outs in case of overheating.

Andersen Circuit Breakers offer E1 winches are supplied with push button with integrated LED which illuminates when power to the winch system is on.

MAURIPRO Sailing, your direct access to Andersen Electric Winches and all your other sailing and boating needs.