XT Series Winch Size 16 Two-Speed, Direct, Reduced - Aluminum

Description	Imperial	Metric
Height	4 2/3 in.	119.00 mm.
Base	4 2/5 in.	112.00 mm.
Drum	2 4/5 in.	71.00 mm.
Weight	5.73 lb.	2.60 kg.
Power 1	7.00	7.00
Power 2	14.00	14.00
Recovery (manual use) 1	9.00 in.	229.00 mm.
Recovery (manual use) 2	4 1/2 in.	115.00 mm.
Min line	1/4 in.	6.00 mm.
Max line	2/5 in.	10.00 mm.
Fixing screws	1/5 x 1/4 in.	5.00 x 6.00 mm.
Gear ratio 1	1 : 1	1 : 1
Gear ratio 2	2 : 1	2 : 1

14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.

Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the vertical drum knurling offers maximum horizontal friction allowing the rope slide upwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.

Our Part # ANTXT162AL | Antal Part # XT16.2/AL

Features:

• XT ST cruise winch
• Power 16
• Two speeds (direct and reduced)
• Switches
• Black aluminum drum