XT Series Winch Size 30 Two-Speed, Direct, Reduced - Chrome

Description	Imperial	Metric
Height	5 1/3 in.	135.00 mm.
Base	5.00 in.	128.00 mm.
Drum	2 7/8 in.	73.00 mm.
Weight	8.16 lb.	3.70 kg.
Power 1	7.00	7.00
Power 2	28.00	28.00
Recovery (manual use) 1	9.00 in.	229.00 mm.
Recovery (manual use) 2	2 2/7 in.	58.00 mm.
Min line	1/4 in.	6.00 mm.
Max line	2/5 in.	10.00 mm.
Fixing screws	1/5 x 1/4 in.	5.00 x 6.00 mm.
Gear ratio 1	1 : 1	1 : 1
Gear ratio 2	4.1 : 1	4.1 : 1

14 new self-tailing winches available in the following versions: Hard black aluminium (AL): the aluminium drum is hard black anodized and teflon coated, scratch-proof and very hard-wearing. Chrome (CH): the drum, ST disks and ST arm are entirely chrome-plated. All chromed parts are highly polished, thickly nickel-plated and finally finished in chrome.

Simple opening: just unscrew the upper ring to immediately dismantle the winch for an easy of cleaning and maintenance. New self-tailing XT system: fixed upper disk with built in ST arm and self-regulating lower disk on springs. The new self-tailing adapts automatically to a wide range of rope diameters and, if overloading occurs, releases the line to avoid excess force on the ST arm. Knurling: the vertical drum knurling offers maximum horizontal friction allowing the rope slide upwards. Differentiated grip (aluminium drums only): minimum friction on the lower part where loads are higher and maximum at the top where loads are minimal: the result is an even grip along the entire drum. CNC base: machined by CNC (computer numeric control machines) is lighter and stronger than normal castings; aluminium made, hard black anodized and teflon coated. Easy removal from the winch makes maintenance a simple affair.

Our Part # ANTXT302CH | Antal Part # XT30.2/CH

Features:

• XT ST cruise winch
• Power 30
• Two speeds (direct and reduced)
• Chromed drum