FREE SHIPPING! for US Continental orders over $99
click for details
Our Part #: MXP-85-316 | Mfr. Part #: 85-316
Easy Pitch Adjustment
If your engine achieves either too much or too little RPM at max throttle, adjust the pitch to a higher or lower setting to attain the correct RPM. Pitch adjustment can be done in the water as the propeller does not need to be disassembled to change the pitch.
Outstanding Power
In forward the Max-Prop will offer 96% of the efficiency of a fixed blade propeller of the same diameter and pitch. The 4% loss in power can usually be eliminated by precisely matching the pitch of the Max-Prop to fit the boat engine combination. The three blade has a major advantage when going against heavy winds and seas, it will maintain the boat speed up to 30% better than the two blade.
Low Drag
Just like other Max-Prop propellers, the Easy feathers to a low drag position while sailing. Under sail the Max-Prop will increase sailing speed by about 15%, the largest difference being noticed when sailing in light air. When sailing with a fixed propeller the vessel has to overcome the fixed blade drag, installing a Max-Prop maximizes sailing performance.
Unmatched Reverse
The Max-Prop provides 80% more power than a comparable fixed blade propeller. The Max-Prop utilizes the same leading edge in forward as it does in reverse giving the propeller the same thrust in both directions dramatically improving control and power in reverse.
The Max-Prop Easy is a step forward in Max-Prop design. This propeller replaces the well-known Max-Prop Classic, facilitating simplicity for the customer without sacrificing performance. The Easy model's main attributes over the Classic are:
- Ease of installation (simple bolt on to the shaft)
- Flexibility of pitch adjustment without the need of a haul out.
Our Part # MXP-85-316 | Max-Prop Part # 85-316
Three Blade Easy Features:
- Added forward power.
- Runs much smoother than a two-blade.
- Low drag under sail (slightly more than a two-blade).
- Available from 12.0 to 26.0 in. (30.5 to 66.0 cm.)
- For shafts 3/4 to 1 3/4 in. (19.1 to 44.5 mm.)
- Best suited for 24 to 55 ft. (7.3 to 16.8 mt.) cruiser (medium displacement)