CPT-100 DVS Transom Mount CHIRP Transducer

Transom mount transducers are recommended for planing hulls of less than 27 feet (8 meters), such as personal watercraft and powerboats with outboard, inboard-outboard and jet drives. They are not recommended for large or twin screw inboard boats because aerated water from the propeller reduces performance. They are also not recommended for operation at very high speeds.

Transom mounts adjust to transom angles from 3° - 16°. For angles greater than 16°, a tapered plastic, wood or metal shim will be needed. However, the transducer should be adjusted so it is angled slightly forward when the boat is in the water.

Our Part # RAY-A80351 | Raymarine Part # A80351

Features:

• Installation: Transom Mount
  
• Material: Urethane
  
• Max Depth (Ft): DV=600 | FF=900
  
• Frequency (KHz): CHIRP DownVision | CHIRP DownVision / Fishfinder
  
• Beam Width (L/H) 25°/60°
  
• Records: Depth / Temperature
  
• Approved Hull Material: Fibreglass / Wood / Metal
  
• Cable Length (Ft/M): 33'/10M
  
• Deadrise: 0-90° Transom